|
 Vacuum Sizing
HT Series Tanks
• Tube/profile capacity up to 2" diameter
• Tank/table length from 9.5 ft (2,896mm) to 11.5 ft (3,505mm)
• For medical tubing, thin-walled tube (straws), small-diameter flexible hose.
Spec Sheet
Current manual Top of Page
 Vacuum Sizing
MT Series Tanks
• Air/water seperator standard on all models
• Tube/profile capacity from 2" to 8" diameter
• Vacuum pump from 1.7 hp to 5.1 hp
• Water recirculation pump from 2 hp to 7.5 hp
• Tank/table length from 7 ft (2,133mm) to 23 ft (7,010mm)
• For medical tubing, thin-walled tube (straws), flexible hose, rigid tube pipe, rigid trim profile
Spec Sheet
Current manual - English
Open Loop Drive information
Top of Page
 Vacuum Sizing
MVSP Series Tanks
• Profile capacity from 1" (25mm) to 22" (559mm) wide
• Vacuum pump from (1) 5 hp to
(5) 5 hp
• Water recirculation pump from 2 hp to 10 hp
• 10 to 76 vacuum outlets
• 10 to 70 water outlets
• Tank/table length from 6 ft (1,829mm) to 22 ft (6,706mm)
• For rigid trim/small profile, window/door lineals, plastic lumber/decking
Spec Sheet
Top of Page
 Cooling Tanks
MCB Series
• Tube/profile capacity from 2" to 8" (50mm to 203mm)
• Pumps from 2 hp to 7.5 hp water
• Uniform cooling for tube, pipe and profile
Spec Sheet
Current manual
Top of Page
Cooling Tanks
MSBHI Water Spray Tank Series
• Tube/profile capacity up to 12 inches (305mm)
• Integral reservoir/spray tank
• Individual control of all spray zones
• Spray system sized for up to 340 GPM
• Increase rates with a process pump and heat exchanger
Spec Sheet
Current manual
Top of Page
/Medline.jpg)
Medline Models Combination Puller/Cutter
• For microbore medical tube production
• Tube capacity up to 1.0" (25.4mm) in diameter
• Belt width of 1.0" (25.4mm) and a traction length of 12" (305mm) with the CPC-1-12 puller model
• Belt width of 3.0" (76.2mm) and a traction length of 20" (508mm) with the CPC-3-20 puller model
• Precise pulling with servo motors
• Self-tracking belt design
• Optional taper/bump/bubble software
• Visible processing
• Intuitive touch screen control
Spec Sheet
Top of Page
Puller
Precision Belt Pullers
• Belt lengths from 20" (508mm) to 39" (991mm)
• Belt widths from 3" (76mm) to 6" (152mm)
• 1.5 hp to 3 hp motors
• Maximum belt opening from 4" (102mm) to 7" (178mm)
• Poly V belt
• For medical tubing, tube, flexible hose, rigid tube/small pipe, flexible trim/gasketing
Spec Sheet
Current manual
Servo Control information
Closed Loop Drive information
Open Loop Drive information
Digital Line Rate Indicator information
Electronic Totalizing Footage Counter information
Top of Page
Pullers
PB Series Belt Pullers
• Belt lengths from 36" (914mm) to 48" (1,219mm)
• Belt widths from 6" (152mm) to 12" (305mm)
• 3 hp motors
• Maximum belt opening from 7" (178mm) to 8" (203mm)
• Poly V belt
• For medical tubing, thin-walled tube (straws), flexible hose, rigid tube/small pipe, flexible trim/gasketing, rigid trim/small profile
Spec Sheet
Current manual
Closed Loop Drive information
Open Loop Drive information
Digital Line Rate Indicator information
Electronic Totalizing Footage Counter information
Top of Page
Pullers
PC Series Cleated Pullers
• Lengths from 36" (914mm) to 120" (305mm)
• Widths from 6" (152mm) to 18" (457mm)
• 3 hp to 10 hp motors
• Maximum opening 7" (178mm)
• For rigid trim profile, window/door lineals, plastic lumber/decking
Spec Sheet
Current manual
Digital Line Rate Indicator information
Electronic Totalizing Footage Counter information
Top of Page
Servo Knife Cutters
CSC Models
• Tube/profile capacity from 1.75" (44mm) to 4.75" (121mm) diameter
• 2.7 hp to 3.8 hp motors
• Servo drives - positional models
• Heavy duty planetary gear reducer (optional)
• 350 to 2,500 cuts per minute (optional)
• For medical tubing, tube, flexible hose, rigid tube/small pipe, flexible trim/gasketing, rigid trim/small profile
Spec Sheet
Current manual
EN Drive information
Top of Page
Cutters
Sure Cut Series
• Tube and profile
• Tube capacity 2.25" (57mm) to 5.25" (133mm) diameter
• Profile capacity 2"x4" (50mm x 102mm) to 2"x10" (50mm x 254mm), 4"x7" (102mm x 178mm)
• 5.6 hp motor
• Servo drive - positional
• 150 to 2,000 cuts per minute
• For thin-wall tube (straws), rigid tube/small pipe, rigid trim/small profile, window/door lineals, plastic lumber/decking
Spec Sheet
Current manual
Top of Page
Combo Puller/Cutter
• Tube capacity from 1.75 (44mm) to 4.75" (120mm) diameter
• Belt widths from 3" (76mm) to 4" (102mm)
• Traction lengths from 20" (508mm) to 26" (660mm)
• For plastic and rubber tubings, rigid tubing, custom profiles
Spec Sheet
Current manual
EN Drive information
Top of Page
/CTS-7%2024in.jpg)
Saws
CTS Series
• Pipe capacity 5" (127 mm) to 9" (229 mm) diameter
• Profile capacity 4"x 8" (102 mm x 203 mm) to 8" x 10" (203 mm x 254 mm)
• 3 hp to 5 hp motors
• AC drive/Servo drive option
• 48-inch table travel option
• For rigid trim/small profile, window/door lineals, plastic lumber/decking
Spec Sheet
Current manual Top of Page
|
