|
Unload handler for small injection moulding machines
• Dynamic AC servo motors for accurate, infinite positioning
• All the axes can be freely programmed
• Simple operation and maintenance
• Minimum energy consumption
• For removal of sprues and parts weighing up to 3 kg
• For injection moulding machines of up to 2500 kN Technical standard specifications
• All the axes with AC servomotors
• X, Y and Z-axis with linear guidance
• Repeating accuracy: ±0,1mm
• Part and gripper weight together: up to 3 kg
• Mains supply: 230/115 V (50/60 Hz)
• Power rating: 350 VA
• Compressed air supply: 6 bar, consumption approx. 0.5 Nl/cycle (without vacuum)
• One compressed air and one vacuum circuit
• Rotation module C0 (0/90°) with monitoring feature
• Freely programmable control EasyControl including EasyTeach
• All the standard Euromap 67 signals Options
• Lengt of Y-axis (Y1000)
• Lengt of Z-axis (Z1000 / Z1600 / Z1900 / Z2200)
• Lengt of X-axis (X400 / X500)
• Additional compressed air and vacuum circuit
• Blow-off function for the compact ejectors
• PC programming software (offline) EasySoft
• Disk drive unit for data safeguarding
• A Linkage of the hardware by means of RS485
• CAN islands for controlling the peripheral devices
• Euromap 12
• Further options upon request
|
